Haldex ABS fault codes

The database covers 78 dealer codes — Haldex ABS uses its own factory format, outside the J1939 SPN/FMI standard. A few examples below; look up your own code in the search on the homepage, where you can also pick “Haldex ABS” from the brand list.

Haldex ABS code examples

00	ABS system OK — fully operational (displayed while vehicle speed is above 6 mph).
05	Blue channel wheel speed sensor S3A wiring — open or short circuit.
13	Blue channel wheel speed sensor S2A — low output signal while moving.
22	Red channel wheel speed sensor S1B — erratic output voltage while moving.
31	Auxiliary channel 1 fault (digital output channel) — PLC Select Plus 2M only.
42	Blue valve channel — slow wheel recovery.
67	Red valve channel — dump solenoid open circuit.
73	Yellow valve channel — hold solenoid short circuit to ground.
81	Red valve channel — hold solenoid short circuit to permanent power.
89	Yellow valve channel — dump solenoid short circuit to permanent power.
9A	ABS ECU memory corrupted.
C2	Configuration status: 4S/2M (not a fault).
E0	Internal fault in the ABS ECU — the ECU is defective, replace it.
E5	Internal fault in the ABS ECU — the ECU is defective, replace it.
EA	Internal fault in the ABS ECU — the ECU is defective, replace it.

Know the code number? Type it into the search — or paste the whole list from the scanner and we will show which fault is the real one.