Safe to driveUntil the next service
J1939 code SPN 143. Below — how the fault is worded at the factory by Renault Trucks and ZF AS-Tronic, and what the second half of the code (FMI) means in the standard.
| FMI 10 | Open circuit. Repair: Switch the ignition off, switch it on again and repeat the test. If the fault persists, replace the control unit. |
ZF AS-Tronic uses its own fault numbering: the number in the table below is an internal ZF code, not a J1939 SPN. It matches the title of this page by digit only and means something different.
| FMI 10 | No signal from the front splitter sensor. |
| SPN 143 FMI 10143/10 · 143.10 | abnormal rate of change |
Safe to drive. Below — how much time you have and what happens if you keep going.
A standalone fault with no immediate consequences for driving.
Show the codes at the next service. If a second code from the same system appears, stop putting it off.
Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.