Do not driveTo the nearest safe stop
SPN 264964 is a manufacturer number outside the standard J1939 table: different makes can put different things under it. Below — how it is worded by Iveco, and what the second half of the code (FMI) means.
| FMI 1 | Right rear wheel sensor fault (air gap out of range) |
| FMI 2 | Right rear wheel sensor fault (incorrect tire or tone wheel) |
| FMI 3 | Right rear wheel sensor fault (short circuit to battery) |
| FMI 4 | Right rear wheel sensor fault (short circuit to ground) |
| FMI 5 | Right rear wheel sensor fault (open circuit) |
| FMI 6 | Right rear wheel sensor fault (short circuit) |
| FMI 7 | Right rear wheel sensor fault (incorrect tone wheel) |
| FMI 8 | Right rear wheel sensor fault (wheel slip) |
| FMI 9 | Right rear wheel sensor fault (wiring mismatched) |
| FMI 10 | Right rear wheel sensor fault (speed signal dropout) |
| FMI 11 | Right rear wheel sensor fault (abnormal speed / chatter, not stored) |
| FMI 12 | Right rear wheel sensor fault (frequency too high) |
Do not drive. Stop as soon as it’s safe to do so — don’t keep going.
The code is flagged critical: the manufacturer considers it unsafe to keep driving without checking.
This code alone cannot say what will fail next, so stop at the first safe opportunity and look at it on the spot.
That said, the manufacturer flags this code as critical — if in doubt, it is safer to stop and check on the spot.
Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.