SPN 266292 — CAN message TSC1 fault (Iveco)

Safe to driveDrivable, but watch it yourself

SPN 266292 is a manufacturer number outside the standard J1939 table: different makes can put different things under it. Below — how it is worded by Iveco, and what the second half of the code (FMI) means.

Iveco

FMI 4

CAN message TSC1 fault (SAE J1939)

What FMI means in J1939

SPN 266292 FMI 4266292/4 · 266292.4

voltage below normal or shorted to ground

Can I keep driving

Safe to drive. Below — how much time you have and what happens if you keep going.

What happens if you keep driving

Time you have: Drivable, but watch it yourself

This is an electrical fault: an open, a short or a bad contact in the sensor circuit. The value it measures is most likely fine.

You can drive. But until the circuit is repaired this system runs blind and cannot warn you about a real failure.

Nearby: other

• SPN 266285End-of-line parameter not valid
• SPN 266286Operating-hours counter value lost
• SPN 266287Fault memory contents lost
• SPN 266289CAN message EEC2 fault
• SPN 266291ECU system error
• SPN 266293CAN transmit error
• SPN 266294CAN bus-off
• SPN 266296CAN acknowledge error
• SPN 266297CAN message EEC1 fault
• SPN 266302CAN message CCVS fault

Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.