Safe to driveTo the nearest safe stop
J1939 code SPN 5007. Below — how the fault is worded at the factory by Renault Trucks, and what the second half of the code (FMI) means in the standard.
| FMI 4 | Fault on the pulse speed output (corrected speed). Repair: Check the equipment connected to pins B6 and B7. If the error does not clear after disconnecting the equipment, replace the tachograph. |
| SPN 5007 FMI 45007/4 · 5007.4 | voltage below normal or shorted to ground |
Safe to drive. Below — how much time you have and what happens if you keep going.
The electrical system is not holding voltage. While the engine runs the alternator carries it; shut it off and you may not restart.
Next the lights go, then modules start dropping out and false codes appear all over the truck. Get to somewhere with help without shutting the engine down.
Check the battery terminals and earth strap — corrosion and loose clamps throw false codes all over the truck. Running voltage should be 27–29 V.
Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.