SPN 520525 — factory code Meritor (ex-WABCO) and SITRAK

Safe to driveDrivable, but watch it yourself

SPN 520525 is a manufacturer number outside the standard J1939 table: different makes can put different things under it. Below — how it is worded by Meritor (ex-WABCO) and SITRAK, and what the second half of the code (FMI) means.

Meritor (ex-WABCO)

FMI 3	Failure detection 'ShortUb' at SolenoidValve (Drive Axle ABV)
FMI 4	Failure detection 'ShortGnd' at SolenoidValve (Drive Axle ABV)
FMI 5	Failure detection 'Interruption' at SolenoidValve (Drive Axle ABV)
FMI 13	Failure detection 'OverEquipped' at SolenoidValve (Drive Axle ABV)

SITRAK

FMI 2

Repeat offence: driver inducement, level 1. Scan tool code: P107A. Effect: Torque may be limited.

What FMI means in J1939

SPN 520525 FMI 2520525/2 · 520525.2	data erratic or intermittent
SPN 520525 FMI 3520525/3 · 520525.3	voltage above normal or shorted high
SPN 520525 FMI 4520525/4 · 520525.4	voltage below normal or shorted to ground
SPN 520525 FMI 5520525/5 · 520525.5	current below normal or open circuit
SPN 520525 FMI 13520525/13 · 520525.13	calibration out of range

Can I keep driving

Safe to drive. Below — how much time you have and what happens if you keep going.

What happens if you keep driving

Time you have: Drivable, but watch it yourself

This is an electrical fault: an open, a short or a bad contact in the sensor circuit. The value it measures is most likely fine.

You can drive. But until the circuit is repaired this system runs blind and cannot warn you about a real failure.

Nearby: other

• SPN 520520
• SPN 520521
• SPN 520522
• SPN 520523
• SPN 520524
• SPN 520526
• SPN 520527
• SPN 520530Overheating at ABS Valve
• SPN 520531Overheating at ABS Valve
• SPN 520532Overheating at ABS Valve

Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.