Safe to driveTo the nearest safe stop
J1939 code SPN 1043. Below — how the fault is worded at the factory by International and Renault Trucks, and what the second half of the code (FMI) means in the standard.
| FMI 0 | Internal Sensor Voltage Supply — Bias Voltage reading above normal range |
| FMI 1 | Internal Sensor Voltage Supply — Bias Voltage reading below normal range |
| FMI 2 | 5 V supply fault at the brake valve, short on the sensor supply. Repair: Check that the voltage between pins X2/2 and X2/3 is within 4.5-5.5 V. Check the continuity of the wiring. |
Safe to drive. Below — how much time you have and what happens if you keep going.
The electrical system is not holding voltage. While the engine runs the alternator carries it; shut it off and you may not restart.
Next the lights go, then modules start dropping out and false codes appear all over the truck. Get to somewhere with help without shutting the engine down.
That said, the manufacturer flags this code as critical — if in doubt, it is safer to stop and check on the spot.
Check the battery terminals and earth strap — corrosion and loose clamps throw false codes all over the truck. Running voltage should be 27–29 V.
Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.