Do not driveMinutes
J1939 code SPN 82. Below — how the fault is worded at the factory by Renault Trucks and ZF AS-Tronic, and what the second half of the code (FMI) means in the standard.
| FMI 6 | Short to battery positive. Repair: Check the wiring between the control unit and the clutch actuator (X1B/12, X1B/16). Run the diagnostic check of the clutch actuator. Switch the ignition off, switch it on again and repeat the test. If the fault persists, replace the control unit. |
ZF AS-Tronic uses its own fault numbering: the number in the table below is an internal ZF code, not a J1939 SPN. It matches the title of this page by digit only and means something different.
| FMI 6 | Short circuit to positive supply on valve Y17 output (clutch slow release). |
| SPN 82 FMI 682/6 · 82.6 | current above normal or grounded circuit |
Do not drive. Stop as soon as it’s safe to do so — don’t keep going.
Part of the brake circuit or ABS/EBS is out of service. The pedal may still feel normal — until the first emergency stop or descent.
Next comes longer stopping distance, a skid on a slick surface, failure on a long downgrade. This is the case where "I will take it slow" does not work.
Let the air system build to working pressure and listen for leaks. Don’t drive with faulty brakes.
Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.