Do not driveMinutes
J1939 code SPN 1082. Below — how the fault is worded at the factory by Ford Trucks, and what the second half of the code (FMI) means in the standard.
Ford Trucks/Ecotorq writes fault numbers in its own format: the code in the table below is a Ford code (hexadecimal, zero-padded), not a J1939 SPN. It matches the standard only where the signal itself is standard, and usually matches the title of this page by digit alone.
| FMI 12 | IT-ECU defected |
| SPN 1082 FMI 121082/12 · 1082.12 | faulty device or component |
Do not drive. Stop as soon as it’s safe to do so — don’t keep going.
The engine is already past its temperature limit. An aluminium head goes fast: first the geometry warps, then the gasket burns through.
Next comes a blown head gasket, a damaged head and, at worst, a cracked block. Shut it down and let it cool — never open the expansion tank cap while hot.
Let the engine cool — never open the expansion tank cap while hot. Then check the level and the hoses.
Scanner threw several codes at once? Paste the whole list — we will show which one is the root cause and which ones simply followed.